SANICUBIC 1 WP : Install a bathroom in a basement
Dreaming of a full basement bathroom? The SANICUBIC lifting station makes it possible, even below main sewer lines. It handles waste from toilets, showers, and sinks without expensive under-slab plumbing. Discover how it enables stylish, fully functional lower-level bathrooms in any home.

Objective
Install a complete washroom with WC, washbasin and shower in a bungalow basement.
Challenges
Compact solution was needed
Lack of gravity drainage
Solution – SANICUBIC 1 WP
1. 1P68, installation in a pit is possible
2. Multiple inlets for the WC, washbasin and shower connection.
3. Supplied with an alarm system
SANICUBIC 1 WP allows the discharge of sewage water from a complete bathroom.
Cutting the slab is not necessary as it is a floor standing lifting station. Its heavy duty grinder technology allows the use of 50 mm pipes as discharge pipes.
The advantages of SANICUBIC 1 WP
- Heavy duty grinder solution
- Max height : 13 m
- Max flow rate 13 m3/h
- Max temperature : 70°C (for 5 minutes)
Frequently Asked Questions
Sanicubic 1 WP can manage wastewater from a WC, washbasin, and shower below the main sewer line. It pumps the wastewater upward without requiring expensive under-slab plumbing or floor cutting.
The grinder breaks down solid waste before discharge, allowing the system to use compact 50 mm discharge pipework and helping reduce blockage risks.
Depending on the model and installation, it can support WCs, washbasins, showers, bidets, sinks, and other suitable wastewater fixtures.
It has multiple inlets, an alarm system, heavy-duty grinder technology, a maximum lift of approximately 13 metres, and a flow rate of up to 13 cubic metres per hour in the referenced application.
The basement is often below the main sewer line, preventing wastewater from flowing naturally by gravity. Traditional solutions may require a pit, floor excavation, or substantial pipe rerouting.
They should confirm fixture placement, discharge height, ventilation, electrical safety, waterproofing, maintenance access, alarm visibility, and local building requirements.
Sanicubic 1 WP can manage wastewater from a WC, washbasin, and shower below the main sewer line. It pumps the wastewater upward without requiring expensive under-slab plumbing or floor cutting.
It has multiple inlets, an alarm system, heavy-duty grinder technology, a maximum lift of approximately 13 metres, and a flow rate of up to 13 cubic metres per hour in the referenced application.
The grinder breaks down solid waste before discharge, allowing the system to use compact 50 mm discharge pipework and helping reduce blockage risks.
The basement is often below the main sewer line, preventing wastewater from flowing naturally by gravity. Traditional solutions may require a pit, floor excavation, or substantial pipe rerouting.
Depending on the model and installation, it can support WCs, washbasins, showers, bidets, sinks, and other suitable wastewater fixtures.
They should confirm fixture placement, discharge height, ventilation, electrical safety, waterproofing, maintenance access, alarm visibility, and local building requirements.